Start from the problem on your line

Quality inspection & defect detection

the problemManual inspection is slow, tires across a shift, and still lets defects reach the customer — where they cost far more to fix.

what you get

• Every part checked, not a sample
• Consistent pass/fail against your criteria
• Defects logged with the image that proves it
• Fewer complaints and returns

Measurement & metrology

the problemHand gauges and spot checks miss drift, and by the time SPC flags it you have already made scrap.

what you get

• 2D/3D dimensional measurement in-line
• Full-batch data, not a sampled few
• Early warning before parts go out of tolerance
• Traceable measurement records

Sorting & grading

the problemSorting and grading by hand is labour you can’t reliably hire for, and two people never grade quite the same way.

what you get

• Automated sorting by size, colour, grade or defect
• Consistent decisions at line speed
• Reject and diverter control built in
• Yield you can measure and improve

Identification & traceability

the problemWhen a batch is questioned, reconstructing where each unit went from paper logs is slow — and sometimes impossible.

what you get

• Read codes, marks and text at line speed
• Unit-level track & trace records
• Integration with your MES / ERP
• A record you can stand behind in an audit

Robotic handling & automation

the problemRigid automation breaks when the part shifts, and manual handling ties up people on repetitive, hard-on-the-body work.

what you get

• Vision-guided pick, place and assembly
• Robots that adapt to where the part actually is
• ROS 2 integration with your cell
• Consistent cycle times, fewer stoppages

Custom vision hardware

the problemSometimes no off-the-shelf camera, controller or interface fits the geometry, the environment or the budget.

what you get

• Custom camera, IO and interface boards
• Embedded firmware and edge compute
• Hardware sized to the machine and its environment
• One partner for the board and the software on it